
Ingersoll Rand Impactool 1/2" - 2707P1
A lightweight impact, with plenty of power, at a great price! The IR 2700 Series 1/2" Air Impact Wrench is perfect for removing tough fasteners in high volume jobs in assembly and automotive jobs. If that's not enough, it does it quitter than most impacts.
Don't forget the accessories needed to help your tool run safely, at peak performance, and extend your tools life. Click here to check out our selection that includes impact sockets, oil, grease, grease guns, tune-up kits, and safety whip checks.
FEATURES:
-1/4' NPT inlet
-Built-in power regulator
-Pin-type socket retainer
-Twin Hammer mechanism
-Steel hammer case
-Durable epoxy-coated handle
-Pressure-feed mechanism lubrication
Before purchasing and using an air impact wrench, please ensure you follow all safety guidelines for the tool. Some important things to make certain you are aware of and have before you use your tool include:
Always use clean, dry air at 90 psig (6.2 bar/ 620 kPa) maximum air pressure at the inlet, unless a higher pressure rating is specified on the tool. Exceeding the maximum rated pressure (PMAX) shown on the tool may result in hazardous situations including excessive speed, rupture, or incorrect output torque or force.
Install a properly sized Safety Air Fuse upstream of hose and use an anti-whip device (safety cable like a Whipcheck) across any hose coupling without internal shut-off, to prevent hose whipping if a hose fails or coupling disconnects (Click here to view our whipcheck collection). Failure to follow safety guidelines and use of proper safety accessories may result in injury or death.
Check out the Ingersoll Rand 2707P1 Impact Wrench Product Information here for more about this impact including operating the power management system (reducing or increasing power on the tool).
Check out the Ingersoll Rand 2707P1 Impact Wrench Parts Cut Diagram here for a parts breakdown of repair/ replacement parts for this model.
Need Impacts Sockets for your 1/2" Drive Impact Wrench?
Check out our selection of 1/2" drive impact socket sets here.
Stubborn Bolts, prepare to meet your match! See the Ingersoll Rand PowerSocket® product video here to see its power! We have them here- check out the selection of 11 sizes available.
Model Specifications:
Recommended Hose Size in (mm) | 5/16 (8) |
Free Speed rpm | 8500 |
Handle | Pistol |
CFM (L/min) | 26 (736) |
Weight Less Socket lb (kg) | 6 (2.72) |
Length Less Socket in (mm) | 6.75 (171) |
Recomm. Torque Range ft-lb (Nm) | 40-275 (54-373) |
Max Torque ft-lb (Nm) | 450 (610) |
Side to Center Distance in (mm) | 1.38 (35) |
Description | 1/2" square |
Impacts per minute | 1300 |