Ingersoll Rand Heavy Duty Impactool 3/4" - 1720P1
Whether it's maintenance and repairs in power plants, large equipment, or big rigs, the 1700 Series 3/4" Heavy Duty Impact Wrench is up to the challenge. A great general purpose impact wrench for industrial applications.
Don't forget the accessories needed to help your tool run safely, at peak performance, and extend your tools life. Click here to check out our selection that includes impact sockets, oil, grease, grease guns, tune-up kits, and safety whip checks.
-3/8" NPT inlet
-Through-hole socket retainer
-Built-in power regulator
-In-handle exhaust (pistol models)
-Jumbo Hammer mechanism
-Durable epoxy-coated handle
-Pressure-feed lubrication system
-Steel hammer case
Before purchasing and using an air impact wrench, please ensure you follow all safety guidelines for the tool. Some important things to make certain you are aware of and have before you use your tool include:
Always use clean, dry air at 90 psig (6.2 bar/ 620 kPa) maximum air pressure at the inlet, unless a higher pressure rating is specified on the tool. Exceeding the maximum rated pressure (PMAX) shown on the tool may result in hazardous situations including excessive speed, rupture, or incorrect output torque or force.
Install a properly sized Safety Air Fuse upstream of hose and use an anti-whip device (safety cable like a Whipcheck) across any hose coupling without internal shut-off, to prevent hose whipping if a hose fails or coupling disconnects (Click here to view our whipcheck collection). Failure to follow safety guidelines and use of proper safety accessories may result in injury or death.
Check out the Ingersoll Rand 1720P1 Heavy Duty Impact Wrench Product Information here for more about this impact including operating the power management system (reducing or increasing power on the tool).
Check out the Ingersoll Rand 1720P1 Heavy Duty Impactool Parts Cut Diagram here for a parts breakdown of repair/ replacement parts for this model.
Check out the Maintenance Manual here to review the guide on properly maintaining this tool to ensure your tool is running as safely and efficiently as possible. Proper tool maintenance, like required lubrication, will also extend the life of the tool. The information in this guide will also provide direction on safe operation like using proper eye protection and disconnecting the air supply before tool maintenance.
Need Sockets For Your 3/4" Impact Wrench?
|Recommended Hose Size in (mm)||1/2 (13)|
|Free Speed rpm||5500|
|CFM (L/min)||40 (1133)|
|Weight Less Socket lb (kg)||11.88 (5.39)|
|Length Less Socket in (mm)||7.63 (194)|
|Recomm. Torque Range ft-lb (Nm)||200-600 (271-814)|
|Max Torque ft-lb (Nm)||1,000 (1360)|
|Side to Center Distance in (mm)||1.91 (48)|
|Impacts per minute||1000|