Ingersoll Rand 1" Drive, D-Handle Impact Wrench w/ 6" Ext. Anvil - IR/2850MAX-6
The new Ingersoll Rand 2850MAX-6, 1” drive D-handle Impact Wrench with 6" extended anvil, is our fiercest 1” wrench yet, loaded with extreme power that lasts as long as you need and continuously delivers over time. With 2,100 ft lbs of torque, This sturdy yet lightweight impact wrench powers through bolts other tools can’t. With a steel core, precision machined impact mechanism and powerful motor, the 2850MAX-6 is solid enough to handle REAL WORK day in and day out without sacrificing power over time. But even with all that high-performance steel, the 2850MAX-6 is still 25% lighter than the industry’s leading 1” wrench, so it’s easy to maneuver and causes less fatigue. No matter how tough the job, you can power through with the 2850MAX-6.
Don't forget the accessories needed to help your tool run safely, at peak performance, and extend your tools life. Click here to check out our selection that includes impact sockets, oil, grease, grease guns, tune-up kits, and safety whip checks.
See the 2850MAX-6 1" Drive Ingersoll Rand Impact video here to see what all this power and durability is about! When finished viewing, click your back arrow button to return to this page.
POWER: Nothing matters more than torque when you’re up against massive jobs. The 2850MAX-6 is our fiercest 1” wrench yet, loaded with extreme power that lasts as long as you need and continuously delivers over time.
DURABILITY: Steel-tough to its core, this heavy-duty impact wrench has been run harder and pushed farther to make sure it can withstand what you throw at it. Because when it comes to REAL WORK, downtime is not an option.
ERGONOMICS: We reduced the tool’s weight without sacrificing what matters most—torque. The 2850MAX-6 is also ergonomically designed for less fatigue.
- Solid steel impact mechanism: Deliver 2,100 ft- lbs of torque
- Highly engineered design: Delivers the power you need over the life of the tool
- Steel core design: Nothing’s been proven to last longer
- Chemical resistant housing & steel core: Stands up to drops and harsh work environments
- Lightweight: 25% lighter than the industry’s leading 1” wrench
- 360° adjustable handle: The side handle rotates fully around the tool as the job demands
- Swivel hose connection: Keeps cords from getting tangled so you can move freely around the garage
- 6” anvil extension: Increases accessibility in hard to reach places
Before purchasing and using an air impact wrench, please ensure you follow all safety guidelines for the tool. Some important things to make certain you are aware of and have before you use your tool include:
Always use clean, dry air at 90 psig (6.2 bar/ 620 kPa) maximum air pressure at the inlet, unless a higher pressure rating is specified on the tool. Exceeding the maximum rated pressure (PMAX) shown on the tool may result in hazardous situations including excessive speed, rupture, or incorrect output torque or force.
Install a properly sized Safety Air Fuse upstream of hose and use an anti-whip device (safety cable like a Whipcheck) across any hose coupling without internal shut-off, to prevent hose whipping if a hose fails or coupling disconnects (Click here to view our whipcheck collection). Failure to follow safety guidelines and use of proper safety accessories may result in injury or death.
Need Impacts Sockets for your 1" Drive Impact Wrench?
|Drive Size, Type||1" - 6 inch ext. anvil|
|Max Forward Torque ft.-lb (Nm)||2000 (2715)|
|Max Reverse Torque ft.-lb (Nm)||2100 (2850)|
|Free Speed (rpm)||5500|
|Weight lb (kg)||21.58 (9.8)|
|Length in. (mm)||19.1 (486)|
|Sound Level dB(A)||96|